Compression

Our COMPRESSION FITTING Injector Tees are simply fitted with spanners or water pump pliers. Unlike our End Feed Fittings they do not require soldering into the pipework. The Tees are made from solid brass, the injector cones and nozzles are made from copper (half hard). Components are Jig assembled to ensure accuracy and hand soldered together.

All Fittings and Components used are manufactured to BS EN 1254 and or ES EN1057.

All our Injector Tees have been proven in the field and are complete and ready to install. Fitting instructions included.

The following sizes and configurations are available from stock - Fitting appearance may vary slightly from photos due to varying pattern of base components :

EQUAL ENDS - 28mm

Straight through injector. Includes compression nuts and olives.

A- 28mm Injected return from pumped circuit.

B- 28mm Return to boiler.

C- 28mm Return from gravity circuit.

Item: 28C180 £19.95 + £3.95 UK P & P ONLY. Contact us for non-domestic P & P rates.

22m reduced end compression injector tee

REDUCED END - 28mm x 22mm

Straight through injector. Includes compression nuts and olives.

A- 22mm Injected return from pumped circuit.

B- 28mm Return to boiler.

C- 28mm Return from gravity circuit.

Item: 2822C180 £19.95 + £3.95 UK P & P ONLY. Contact us for non-domestic P & P rates.

Google Sites

Report abuse