www.injector-tee.co.uk
HOME                          ONLINE SALES                          CONTACT

Our END FEED Injector Tees require Soldering into the pipework and are a neater and more professional looking alternative to our Compression Fittings. The Tees, injector cones and nozzles are made from copper (half hard). Components are Jig assembled to ensure accuracy. The injector cones and nozzles are either a one piece design or BRAZED together with copper phosphorous brazing rods, which means they cannot become unsoldered and dislodged when heated up during fitting. The complete cone and nozzle are then soldered into the Tee and cannot become dislodged as they are physically trapped between the fitting and the circuit pipework.
All Fittings and Components used are manufactured to ES EN1057.
All our Injector Tees have been proven in the field and are complete and ready to install. Fitting instructions included.
The following sizes and configurations are avaiable from stock:

PAYMENT, SHIPPING & RETURNS INFO




28mm compression straight through EQUAL INJECTOR TEE - 28mm.
Straight through injector. End Feed.
A- 28mm Injected return from pumped circuit.
B- 28mm Return to boiler.
C- 28mm Return from gravity circuit.
Item: 28EF180 15.95 + 3.45 UK P & P ONLY. Contact us for non-domestic P & P rates.

28mm compression straight through REDUCED END INJECTOR TEE - 28mm x 22mm.
Straight through injector. End Feed.
A- 22mm Injected return from pumped circuit.
B- 28mm Return to boiler.
C- 28mm Return from gravity circuit.
Item: 2822EF180 16.95 + 3.45 UK P & P ONLY. Contact us for non-domestic P & P rates.



End Feed Injector Tee End Feed Injector Tee End Feed Injector Tee