www.injector-tee.co.uk
HOME                          ONLINE SALES                          CONTACT

Our COMPRESSION FITTING Injector Tees are simply fitted with spanners or water pump pliers. Unlike our End Feed Fittings they do not require soldering into the pipework. The Tees are made from solid brass, the injector cones and nozzles are made from copper (half hard). Components are Jig assembled to ensure accuracy and hand soldered together.
All Fittings and Components used are manufactured to BS EN 1254 and or ES EN1057.
All our Injector Tees have been proven in the field and are complete and ready to install. Fitting instructions included.
The following sizes and configurations are avaiable from stock:

PAYMENT, SHIPPING & RETURNS INFO




28mm compression straight through EQUAL INJECTOR TEE - 28mm.
Straight through injector. Includes compression nuts and copper olives.
A- 28mm Injected return from pumped circuit.
B- 28mm Return to boiler.
C- 28mm Return from gravity circuit.
Item: 28C180 18.95 + 3.45 UK P & P ONLY. Contact us for non-domestic P & P rates.

28mm compression straight through REDUCED END INJECTOR TEE - 28mm x 22mm.
Straight through injector. Includes compression nuts and copper olives.
A- 22mm Injected return from pumped circuit.
B- 28mm Return to boiler.
C- 28mm Return from gravity circuit.
Item: 2822C180 18.45 + 3.45 UK P & P ONLY. Contact us for non-domestic P & P rates.



Compression Injector Tee Compression Injector Tee Compression Injector Tee